Class 1 Commercial Engineers · GRP & Composite Specialists

Boat Moisture Testing & Osmosis Survey

Moisture is the most misunderstood number in boat surveying. A meter reading on its own tells you very little; where the reading was taken, what it was compared against, and what the hull is made of tells you everything. We test properly and explain the results in plain language.

Call +64 22 162 2413 Email Us

Why Moisture Matters

Water enters a GRP laminate through the gelcoat, through fittings and fastenings, through cracks and impact damage, and through the hull below the waterline over decades of immersion. In a solid laminate it lowers strength and can lead to blistering and, eventually, delamination. In a cored laminate, water in the core is far more serious: balsa and foam cores rot, delaminate and lose structural value, and the repair is invasive and expensive.

Timber vessels have their own moisture dynamics, and plywood and timber cores behave differently again. The material and construction determine what a reading means.

How We Test

We use calibrated capacitance or resistance meters, taking a grid of readings across the hull, decks, cabin tops and superstructure rather than a handful of spot checks. Readings are taken at consistent heights and spacings, and compared against reference points: above the waterline where the laminate is dry, known dry areas of the same vessel, and the vessel's own baseline where a previous survey exists.

Meter readings are only part of the picture. We combine them with percussion testing (tapping) to detect delamination and voids, visual inspection for blistering, cracking, weeping fittings and staining, and inspection of the hull below the waterline where the vessel is ashore. On cored structures we sound and, where necessary, take core samples.

Temperature, humidity, hull temperature and recent haul-out all affect readings, and we record the conditions so the numbers can be interpreted correctly and compared with future surveys.

What the Numbers Mean

We report readings against a consistent scale: 0 to 10 percent is acceptable, indicating a dry laminate. 11 to 20 percent is a monitoring band, where moisture is present but not yet at a level that demands action. 21 percent and above is elevated and requires further investigation, because at that level blistering, delamination and core damage become real risks.

A single high reading is not a diagnosis. A cluster of high readings in one area usually indicates a local source: a leaking fitting, a damaged area, a poorly sealed chainplate or a repair that let water in. Widespread elevated readings across the underwater hull indicate long-term ingress through the gelcoat, which is the classic precursor to osmosis.

Osmosis and Blistering

Osmotic blistering is a chemical process: water diffuses into the laminate, dissolves water-soluble materials in the resin, and creates cells of concentrated solution that draw in more water by osmosis. The result is blisters under the gelcoat, which can pop, weep and spread. It is a slow process and not usually an immediate safety issue, but it is a value issue, and it gets more expensive the longer it is left.

Treatment ranges from drying and barrier coating for early-stage moisture, through blister removal and epoxy treatment, to full laminate repair where delamination has occurred. We assess the stage, describe the likely treatment path, and give indicative costs so the decision is informed.

When to Test

Before buying any GRP vessel more than about ten years old; before a major refit or repaint, so you are not painting over a problem; at insurance renewal where moisture is a concern; after a grounding, impact or repair; and periodically as part of an owner's maintenance record, so you have a baseline to compare against.

Cost

A standalone moisture survey is typically $450 to $750 plus GST depending on vessel size and the area covered, and it is included as standard in our pre-purchase and condition surveys. Travel is quoted separately outside the Auckland region. Where the vessel needs to be ashore for a proper underwater assessment, the yard charges sit outside our fee.

Concerned About Moisture?

Send us the vessel details and any previous readings, and we will scope the test and tell you what it will cost.

Call +64 22 162 2413 info@weddingandpainemarine.com

Boat Moisture Testing & Osmosis Survey — Frequently Asked Questions

Can you test for moisture with the boat in the water?
Above-waterline areas can be tested afloat, but the underwater hull must be tested ashore for a reliable result. We recommend a haul-out for any serious moisture assessment.
What is a normal moisture reading?
On a dry GRP hull, 0 to 10 percent is acceptable. 11 to 20 percent means moisture is present and should be monitored. 21 percent and above requires investigation.
Does a high reading mean the boat has osmosis?
Not necessarily. Elevated moisture is a precursor and a risk factor. Osmosis is confirmed by blistering and, where needed, by opening a blister and testing the fluid. We report both the readings and the visual evidence.
Can wet laminate be dried out?
Often yes, given time and the right conditions, followed by a barrier coating. Severe cases involving delamination or wet core need physical repair. The report will say which situation you are in.
Will moisture affect my insurance?
It can. Insurers may require remediation or exclude related claims where moisture is significantly elevated. A clear, dated report with readings and interpretation is the best way to manage that conversation.
How long does a moisture survey take?
Two to four hours for a typical vessel, depending on size and the area covered. Readings and interpretation are included in the written report within 48 hours.

Related Guides

Straight answers from our Class 1 engineers:

Moisture & OsmosisPre-Purchase Checklist

Other Survey Services

Every survey is carried out by a Class 1 Commercial Marine Engineer:

Pre-Purchase SurveyInsurance SurveyCondition SurveyMachinery & Engine SurveyValuation Survey

Survey Other Regions

Wedding & Paine Marine survey vessels across all of New Zealand:

AucklandWhangareiTaurangaWellingtonChristchurchNelsonQueenstown

Also surveying in

Auckland · Whangarei · Tauranga · Christchurch · Nelson · Queenstown